Home - Products - ECU Chip Tunning - KTMflash ECU Programmer & transmission power upgrade tool
« Go Back

KTMflash ECU Programmer & transmission power upgrade tool

Item No. :SE140
5 stars, 2 reviews.
In Stock
Buy it Now (1 pcs):US$299.00 
Retail price:US$329.00
You save US$30.00
Quantity:
  
Shipping:
Free Shipping     Express Shipping Service 
Estimated delivery time: 3-5 Days.See details »
Weight:
250g
Package:
15cm*13cm*7cm        ( Inch: 5.91*5.12*2.76 )
Returns:
Return for refund within 7 days,buyer pays return shipping.Read details »
KTMflash can read the chip data, read $ write ECU data, read transmission data etc at a high speed.
KTMflash ECU Programmer & transmission power upgrade tool 
 
Read the chip data, read $ write ECU data, read transmission data etc at a high speed.
 
KTMflash Functions:
1.Read the Chinese car via OBD.
3.Read the BOOT mode according to the chip model
4.Read the encrypted ECU password (Read the password of encrypted ECU first, then read data)
5. Support cars made in China with ME17 TC1728/1767 for data reading & writting and password reading

Softeare Display
KTM flash
KTM flash-2
KTM flash-3
KTM flash-4
KTM flash-5
KTM flash-6



Workable Transmission Model:
VAG: DQ200 (0AM) 
VAG: DQ200MQB/G2 (0CW) 
VAG: DQ250C (02E) K-Line 
VAG: DQ250E/F (02E) 
VAG: DQ250MQB (0D9) 
VAG: VL300/V30 (01J/0AN) K-Line 
VAG: VL300/V30 (01J/0AN)
VAG: VL381 (0AW) 
VAG: DQ500 (0BH/0BT) 
VAG: DL501/G2 (0B5) 
VAG: DQ200/MQB Boot (MICRO) 
VAG: DQ200/MQB Boot (EEPROM) 
VAG: DQ200G2 Boot (MICRO) 
VAG: DQ200G2 Boot (EEPROM) 
VAG: DQ250E/F/MQB Boot (MICRO) 
VAG: DQ250E/F/MQB Boot (EEPROM) 
VAG: VL300/V30 BSL (FLASH)
VAG: VL300/V30 BSL (EEPROM) 
VAG: VL381 Boot (MICRO) 
VAG: VL381 Boot (EEPROM) 
VAG: DL501 Boot (MICRO) 
VAG: DL501 Boot (EEPROM)
VAG: DL501G2 Boot (MICRO) 
VAG: DL501G2 Boot (EEPROM)
 
Read Chinese car via OBD:
China: Chery, Great Wall, Lifan, SAIC ME17 (ME17.8.8) 
China: Chery, Great Wall, Lifan MT80 K-Line Calibration (Delphi MT80)
China: Chery, Great Wall, Lifan MT80 CAN-bus (Delphi MT80)
 
Read the BOOT mode according to the chip model:
Infineon: TC1762/TC1766 MICRO (1504KB) 
Infineon: TC1762/TC1766 EEPROM (32KB) 
Infineon: TC1792/TC1796 MICRO (2048KB) 
Infineon: TC1796 MICRO+EXT (4096KB/6144KB) 
Infineon: TC1796 EXT (2048KB/4096KB) 
Infineon: TC1796 EEPROM (128KB) 
Infineon: TC1792 EEPROM (64KB) 
Infineon: TC1738/TC1767 MICRO (2048KB)
Infineon: TC1738/TC1767 EEPROM (64KB) 
Infineon: TC1797 MICRO (4096KB) 
Infineon: TC1797 MICRO+EXT (6144KB/8192KB)
Infineon: TC1797 EXT (2048KB/4096KB) 
Infineon: TC1797 EEPROM (64KB) 
Infineon: TC1724/TC1728 MICRO (1536KB)
Infineon: TC1724/TC1728 EEPROM (64KB) 
Infineon: TC1782/TC1784 MICRO (2560KB) 
Infineon: TC1782/TC1784 EEPROM (128KB) 
Infineon: TC1793/TC1798 MICRO (4096KB) 
Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB) 
Infineon: TC1793/TC1798 EXT (2048KB/4096KB) 
Infineon: TC1793/TC1798 EEPROM (192KB) 
 
Read the encrypted ECU password (Read the password of encrypted ECU first, then read data):
Bosch: Support Chinese car ME17 TC1728/1767 data reading & writing and password reading
Bosch: BMW/MB/VAG GPT 
Bosch: Ford/Opel/Volvo GPT 
Bosch: BMW TPROT8+ 
Bosch: VAG TPROT8+ 
Bosch: Kia/Hyundai/Honda TPROT8+ 
Bosch: Chrysler/Jeep/Dodge/Fiat TPROT8+ [Test] 
Bosch: VAZ/UAZ ME17.9.71  
Continental: Kia/Hyundai/SsangYong SIM2K-24X/C201 
Continental: Ford EMS2204
Continental: Ford EMS2207 
Continental: Ford EMS2211
Continental: Ford SID208 
Continental: Ford SID209 
Continental: Ford Mondeo 4 SID807EVO
Continental: Ford Focus 3/Transit Connect SID807EVO 
Continental: Citroen/Peugeot SID208 
Kia/Hyundai: Delphi MT86 EEPROM (16KB) 
Mercedes-Benz: Delphi CRD3.1 EEPROM (32KB) 

How to use KTM FlASH ECU programmer Switch board? 
1. The switch board is designed to work with J2534, this device uses the Ktag cables so the user can refer to the Ktag wiring diagram. 
 
2. Advise you use Open Port2.0 as the protocol conversion equipment and work with PC.
 
3. There are 3 types of Bosch Infineon ECU : 
 1) The Infineon ECU before TPROT8.
 2) TPROT8-10 
 3) The Infineon ECU after TPROT10 which is what we call GPT encrypted. 
 
4. The Infineon ECU before TPROT8 is not encrypted, you directly uses the BOOT point 
grounding, then follow the Ktag user manual to wire the cable and read the data. 
 
5.For TPROT8-10,the Bosch Company set the anti-debugging mode, reading EEPROM needs no password and reading Flash needs password. 
 Therefore, during the reading process, there is an extra CNF1, Boot outputs low level and CNF1 outputs high level. When reading, Boot needs to add one small resistor and ground it. CNF1 to connect one 470ohm-2K resistance, then connect 3.3V, it's very important, otherwise the ECU will be burnout. 
2 tips on reading the data: 
 1) BOOT and CNF1 must be connected when reading data. 
 2) Only connect BOOT not CNF1 When reading the password, otherwise the password can't be read out. Also you can follow the Ktag wiring diagram because Ktag controls the CNF1 turn on and off, so it can't be disconnected. When reading the password, you turn the two switches to the automatic mode, and to the On mode when reading the data, when the software prompts, you choose " Manually" then follow the message to turn on or off.
 
6. For GPT encrypted ECU, the S1, S2 and Boot cable are needed to connected when reading password, and the S1, S2 don't need to be connected when reading data.
 
Package includes:
 
1pc x KTMflash ECU Programmer
1pc x KTMflash USB Dongle
Why Customers Believe in POBD2.COM?
 
Nine-year-old shop - POBD2.COM was founded in October 2009.In the past 9 years, we are always committed to providing our customers with best products and best service. 
High-Quality and Low-Cost - We promise to supply the best item with a low price. With a large quantity of stock, a professional technical engineer team, some strict quality-control members, we are able to provide you high quality and cost effective auto repair tools 
Fast Delivery - Available with plenty of stock and various delivery methods (DHL, UPS, EMS, Yanwen, FedEx and TNT), the package delivery time can be as short as 3-5 working days by express way. Besides, the delivery tracking system Courier Companies provide allow our customers track their packages at anytime and anywhere once the packages are shipped out. We aim to guarantee you a safe and fast delivery.
Free Technical Support- our dedicated engineer will provide you free and complete after-sale technical service according to your specific needs. Moreover, we are available with "Download" Column; it is free for you to download the related tools’ software, user manual, USB driver, operation instruction, testing videos.
Good Customer Service- It’s our pleasure to answer all the customers' questions. You can contact us through below ways:
live chatting window on our order page. 
Skype: eobd11. Whatsapp: +86 13477079316 
Email: sales@pobd2.com  obdshop@gmail.com

Hot Recommend One
 vxdiag
Hot recommend Two
gm tech2-1


Contact Information:

 Live Support Live Support: Chat online now 
 Email Email: sales@pobd2.com
 Skype Skype: eobd11

WhatsApp:+
86 13657243763

 

                     
Tel:+86 13477079316

Scanning our QRcode and shopping on phone easily.

Let's be friends!  POBD2 Bolg   POBD2 Facebook   POBD2 Google+   POBD2 Twitter   POBD2 Linkedin   POBD2 RSS   POBD2 Youtube

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      9724    No right? Get a new Verification Code
 
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.
Product's Tags:   KTMflash 6.18 Promotion
Bookmark It