BENZ key Programmer programs the key for Mercedes A-klasa, E210 ,ML320, W140, Gelenvagen with PCF7935 chip
Auto Key Programmer for BENZ
1. Program the key for Mercedes A-klasa, E210 ,ML320, W140, Gelenvagen with PCF7935 chip.
Specific steps to use:
1. Click<0D69J> to select the model of the chip or the car
2. Click <Load EE>to load the EEPROM data read out by using the 705 programmer
3. When the data is loaded, the lower screen will diplay <That EEProm with take mask has used keys N,1,2,3>
, it means that the first, the second and the third key is in use.
4. Click <Key> to select the key number. There are totally 8 keys available.
Don’t select the key number which is in use, otherwise the key will be erased.
5. Place the PCF7935 in the hole as shown in the figure, click <Write Key>to
begin to write the key. It takes about 1 minute for writing the key.
6. When the key is successfully written, the screen will display <Chec..Programm and check.. OK..>
7. Insert the chip onto the key. The key is done!
Note: When writing keys for ML320, please correct all the red data to FF, and then perform the above
1xBenz Key Programmer
1x 9 Pin Cable
Scan obd16shop QRcode, convinent and faster
Any problems, please feel free to contact us.
Kindly Note: pls leave your telephone number for shipping arrival when you make payment for this product on our website and make sure that your paypal shiping address is the same with the address you want us to sent.Before signing,pls confirm everything is good.
How to buy on OBD16Shop.com